Pride Go Go Elite Traveller Gen 3 Buyer's Guide

What Is the Pride Go Go Elite Traveller Gen 3?

The Pride Go Go Elite Traveller Gen 3 (SC443E) is a compact four-wheel travel mobility scooter designed for portability, maneuverability, and rider comfort. It has a 300 lb. weight capacity, a top speed of 4.23 mph, and an overall width of 19.45 inches. Pride's EZ Turn Technology gives it a 39.2-inch turning radius, while five-piece Feather Touch disassembly helps with vehicle transport.

The biggest change is the redesigned rider area: a sloped deck with more legroom, increased passthrough space, and more ways to position your feet. For available options and the full product description, see the Pride Go Go Elite Traveller Gen 3 product page.

Who Is the Elite Traveller Gen 3 Designed For?

The Gen 3 is particularly well suited to someone who wants a scooter for use around the home, in a vehicle, and at everyday destinations such as shopping centers, restaurants, appointments, vacations, and family outings. It may appeal to riders who want four-wheel stability alongside tight indoor maneuverability.

It is designed primarily for smooth everyday surfaces such as indoor flooring, maintained sidewalks, paved paths, and stores.

More Legroom With the New Gen 3 Deck

Compact travel scooters naturally have limited space. Pride redesigned the Gen 3 deck to make better use of the rider area without making the scooter wider. It has a flat center section and sloped areas extending toward the front wheels, so riders can keep their feet flat or position them farther forward. Its textured surface is easy to clean and adds traction.

If a compact scooter has felt cramped to you, the new foot-position options are worth considering alongside seat fit and tiller reach.

Four Wheels With EZ Turn Technology

The Gen 3 uses Pride's EZ Turn Technology to combine four-wheel stability with tight maneuverability. Its published turning radius is 39.2 inches. That matters in stores, elevators, hallways, kitchens, and other confined spaces where fitting through a doorway is only part of the challenge. Its 19.45-inch overall width also helps keep the scooter compact.

If you're weighing this model against the previous generation, read our Go Go Elite Traveller Gen 3 vs. Elite Traveller 2 comparison.

Is the Gen 3 Easy to Transport?

The Elite Traveller Gen 3 separates into five pieces with Pride's Feather Touch disassembly system. The heaviest disassembled section weighs approximately 36.2 lbs. Rather than lifting the complete scooter, you can load the sections separately.

Before buying, consider who will load it, your vehicle's cargo-floor height and available space, and whether the heaviest piece is manageable. Measure your vehicle if you expect to transport the scooter regularly.

12Ah or 18Ah Battery?

The Elite Traveller Gen 3 offers two battery choices. At a rider weight of 220 lbs., Pride publishes up to 8.9 miles with the 12Ah battery or 14.1 miles with the 18Ah battery. At 300 lbs., the published figures are up to 7.1 miles and 11.3 miles, respectively.

The 12Ah battery may suit shorter outings, while the 18Ah option offers more published range for longer days away from home or more reserve between charges. Actual range varies with rider weight, terrain, temperature, battery condition, driving habits, and other factors.

Rider Fit and Comfort

The Gen 3 has a 300 lb. maximum weight capacity and a 17 x 17 inch foldable seat with a breathable mesh back. Fit involves more than seat dimensions: the new deck offers different leg and foot positions, and the angle-adjustable wraparound Delta tiller lets you adjust the steering position for your reach.

Everyday Features

Front and rear pathway lights provide extra visibility in lower-light settings. Flat-free, non-scuffing tires remove the need to maintain tire pressure and reduce worries about punctures away from home. A large removable front basket keeps small belongings within reach. Read our Go Go Elite Traveller Gen 3 Features Guide for a closer look.

Questions to Ask Before Buying

Does the 17 x 17 inch seat fit the rider comfortably, and does the deck provide a good leg and foot position?
Is the 36.2 lb. heaviest piece manageable, and will the disassembled scooter fit in your vehicle?
Will the 12Ah battery cover typical outings, or would the 18Ah option be a better fit?
Will most riding take place on the smooth surfaces this travel scooter is designed for?

Answers to these questions are more useful than any single specification. You can also compare Pride travel scooters side by side if you are still deciding which model best fits your needs.

Why the Elite Traveller Gen 3 Stands Out

The Gen 3 keeps the portability expected of a Go Go travel scooter while adding more room for the rider through its redesigned sloped deck. It combines flexible foot positioning, a narrow overall width, EZ Turn maneuverability, five-piece disassembly, two battery choices, an adjustable tiller, and a 300 lb. capacity.